The FIBARO RGBW Z-Wave Controller 2 is a Z-Wave Plus module for controlling RGB/RGBW LED strips, one-color LED strips, halogen lights and other compliant resistive loads. The FIBARO RGBW Z-Wave Controller 2 can also measure active power and energy consumed by the load and act as a Z-Wave signal repeater.

Features

• Controls LED, RGB, RGBW strips, and halogen lights
  

  The FIBARO RGBW Z-Wave Controller 2 uses PWM output signal, allowing it to control RGB/RGBW LED strips, one-color LED strips, halogen lights and other compliant resistive loads.

• Input Support
  

  The FIBARO RGBW Z-Wave Controller 2 can support inputs momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.

• Power and energy metering
  

  The FIBARO RGBW Z-Wave Controller 2 measures active power and energy consumed by the load, helping you better control and manage your energy usage.

• Z-Wave Signal Repeater
  

  The FIBARO RGBW Z-Wave Controller 2 can act as a Z-Wave signal repeater to extend the Z-Wave network to optimize device performance in large homes or areas with wireless interference.

COMPATIBILITY

Protocol

SPECS

Technical Specifications

• Power supply: 12/24V DC ±10%
• Rated load current:
• 6A for channel,
• 12A total for all outputs
• Power output:
• 144W combined for 12V
• 288W combined for 24V
• Inputs: 4 inputs, 0-10V (configurable pull-up) or binary
• Outputs: 4 outputs, PWM
• PWM frequency: 244Hz
• Maximum length of wires: 2m
• Operating temperature: 0–40°C (32–104°F)
• Storage temperature: -40–60°C (-40–140°F)
• Radio protocol: Z-Wave (500 series chip)
• Radio frequency:
• 868.4 / 869.85 MHz EU;
• 908.4 / 916 MHz US;
• 919.8 / 921.4 MHz ANZ;
• 869.0 MHz RU;
• Transmit power: EIRP max. +2dBm
• Range:
• up to 50m (164 ft) outdoors
• up to 40m (131 ft) indoors
• (depending on terrain and building structure)
• Recommended wire cross-section area: 0.2–2.0mm2 (24–14 AWG) (depending on load current)
• Dimensions (Length x Width x Height): 42.35 x 36.90 x 17.5 mm (1.67” x 1.5” x 0.69”)
• Compliance with EU directives
• RoHS 2011/65/EU
• RED 2014/53/EU

INSTALLATION

Installation Guide

Manual