The Global Caché Flex Link RS485 Serial Cable connects to your iTach Flex Module to enable IP/WiFi control for all RS485 serial components. The RS485 setting includes Baud Rate, Duplex, Parity, Data Bits, and Stop Bits. The RS485 serial cable is both 4-wire (full duplex) and 2-wire (half duplex) capable, duplex is unique to RS485 serial cables. 

Features

• Four wire (full duplex) and Two wire (half duplex) capable.
• 5 pin screw terminal block.
• Connector at 90° angle for easy fit.
• 5 ft (1.5 meters) cable.

COMPATIBILITY

Works with

Works with Global Caché iTach Flex IP or Wi-Fi controllers.

SPECS

Technical Specifications

• Setup
• Configurable using hardware jumpers and through
• Flex integrated web server or software API
• Serial Outputs
• Supports standard 8 data bit serial.
• RS485:
• Four wire (full duplex) and Two wire (half duplex) capable.
• Serial Configurations
• Flex Link Serial cables are configurable with the following settings:
• Baud Rate: 300 baud to 115200 Kbaud.
• Parity: Even, Odd, or None.
• Stop bits: 1 or 2.RS232:
• Flow Control: Enable hardware RTS/CTS flow control.
• Gender: Allows configuration of cable gender. Allows for null modem and straight through cable creation.
• RS485:
• Duplex: full duplex or half duplex.
• RS422 compatible.
• Cable/Connector
• 3.5 mm four conductor jack to Flex Link Port on iTach Flex devices.
• RS485:
• 5 pin screw terminal block.
• Connector at 90° angle for easy fit.
• 5 ft (1.5 meters) cable.
• No power supply required.
• Dimensions
• RS485: 1.5” x 1.2” x .7”
• Warranty: Two year limited warranty
• Support available via phone, email, and web portal

INSTALLATION

Installation Guide

Quick Start Guide